shower. Friday , November 03rd , 2017 - 06:31:40 AM
You would then need to position the brackets on the wall, and mark around the outside edge using a pencil. The next step is hammering a nail into the wall where the screws are supposed to be put. The curtain shower curtain rod set would have screws if mounting on a stud, or drywall anchors if mounting solely on a drywall.
One of the most paramount parts of a shower party is food and drink. You should have enough food for not only the invited guests but also some unexpected guests. You have to be prudent so that when expected guests come, you don't go short of food.Tub Shower Combo Ideas!
You will then need to accurately measure from the bottom of the shower upwards and from wall to wall. Then with great due care and attention use the hacksaw to cut the bottom rail. Then underside of the bottom rail needs to then be sealed and placed in the centre of the bath or shower cubicle. Lining up each of the side rails with your level you will need to mark the different screw holes on the wall. Using your small drill you will then need to drill the holes into the wall at a depth of approximately 1 1/4" deep. If you need to you can also insert anchors.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Uoflgolfscramble claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.